Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Maplus Merino Wool (12mm) roto brush 100mm
Merino Wool (10mm) roto brush.
To be used for polishing of perfluorinated waxes FP4 on cross-country or alpine ski.
Size: 100 mm.
Packaging: 0.1 kg
Unit: pcs
Varastossa
SKU
MTO072N
Special Price 18,05 € Regular Price 19,00 €
MAPLUS
Merino Wool (10mm) roto brush.
To be used for polishing of perfluorinated waxes FP4 on cross-country or alpine ski.
Size: 100 mm.
Polyester and Merino wool rollers especially recommended for hot or cold application of every FP4 perfluorinated waxes (powder, spray or solid) as detailed in Maplus Ski Wax waxing manual, available on www.maplus.it.
Instead of roto-cork and traditional horsehair and nylon brushes, use new rollers of polyester and merino wool as follows:
1. Roll the base surface with the rotopolyester in both directions at a speed between 1000 and 1500 rpm according to the pressure applied.
Repeat several times until the complete saturation of the base surface.
Wait at least 10 minutes for cooling of the base surface and for the ski wax to harden.
2. Free the base structure with the 5 mm. roto-wool.
3. Polish the base structure with the 12 mm. roto-wool.
For top performances is necessary one set of new rollers for every type of product (cold-med-hot).
To be used for polishing of perfluorinated waxes FP4 on cross-country or alpine ski.
Size: 100 mm.
Polyester and Merino wool rollers especially recommended for hot or cold application of every FP4 perfluorinated waxes (powder, spray or solid) as detailed in Maplus Ski Wax waxing manual, available on www.maplus.it.
Instead of roto-cork and traditional horsehair and nylon brushes, use new rollers of polyester and merino wool as follows:
1. Roll the base surface with the rotopolyester in both directions at a speed between 1000 and 1500 rpm according to the pressure applied.
Repeat several times until the complete saturation of the base surface.
Wait at least 10 minutes for cooling of the base surface and for the ski wax to harden.
2. Free the base structure with the 5 mm. roto-wool.
3. Polish the base structure with the 12 mm. roto-wool.
For top performances is necessary one set of new rollers for every type of product (cold-med-hot).
Package width | 50 |
---|---|
Package Length | 50 |
Package height | 100 |
Write Your Own Review